'colinux FC10'에 해당되는 글 1건

  1. 2009.04.10 colinux + FC10 설치기 2
프로그램 사용/coLinux2009. 4. 10. 14:01
colinux는 User-level kernel로 완전한 시스템을 운영할 수 있게 합니다.
일단 colinux는 kernel와 linux 배포판 이미지로 나누어져 다운로드 받을 수 있으며
아래의 coLinux-stable은 colinux kernel 및 실행 프로그램
그리고 아래의 Images는 각 linux 배포판 root filesystem 입니다.
FC10 기준 인스톨러는 150M 정도이지만, RAR 압축을 해제 하고 나면 4기가 정도의 용량을 차지 합니다.
(이런 놀라운 압축력!)



Package Release Date Notes / Monitor Downloads

coLinux-stable 0.7.3-linux-2.6.22.18 June 8, 2008 Release notes     Monitor this package Download
Images 2.6.x ArchLinux ArchLinux 2007.08-2 February 7, 2008 Release notes     Monitor this package Download
Images 2.6.x Debian Debian 4.0 Etch May 8, 2007 Release notes     Monitor this package Download
Images 2.6.x Fedora Fedora 10 February 28, 2009 Release notes     Monitor this package Download
Images 2.6.x Gentoo Gentoo 2006.1 March 2, 2007 Release notes     Monitor this package Download
Images 2.6.x Ubuntu Ubuntu 7.10 March 14, 2008 Release notes     Monitor this package Download
[colinux : http://colinux.org/]
[colinux down : http://sourceforge.net/project/showfiles.php?group_id=98788]


인스톨러를 실행하면 나오는 화면입니다(이 앞에는 GNU 동의하냐는 것이 있어서 패스 입니다)

coLinux와 RootFS image를 받았다면 아래의 Root Filesystem image Download는 체크 해제 하시면 됩니다.

coLinux 세부내용 입니다. 귀찮으니 기본 값으로 넘어갑니다.

혹시 RootFS를 받지 않으셨다면, Root Filesystem image Download를 체크하시고 다음을 누르면
위와 같은 선택화면이 나옵니다. 여기에는 아쉽게도 FC7로 표기가 되어 있습니다.

설치를 진행하면 WinPCAP을 사용한다는 말이 나옵니다. 일단 귀찮으니 여전히 패스 -ㅁ-

설치가 진행되다가 이 부분에서 멈춥니다. 그리고 아래의 창이 뜹니다.

설치하면 무슨 Adaptor가 설치됩니다. 모르니 일단 계속 해주고 넘어 갑니다 -ㅁ-

Adaptor가 네트워크였나 봅니다 -ㅁ- 생각치도 못하게 로컬 영역 연결 3이 생겼습니다

일단은 설치가 완료 되었습니다! 그렇다고 해서 바로 실행할수는 없습니다.
아직 RootFS를 설치하지 않았기 때문이죠~!

따로 받은 RootFS를 압축해제 합니다. 용량이 4기가 정도 되어서 생각보다 오래 걸립니다.

기본 설치 위치는 C:\Program Files\coLinux 이고, 그 하위에 압축 해제된 FC10 RootFS 디렉토리를 이동시켜 줍니다.

"c:\Program Files\coLinux\colinux-daemon.exe" kernel="C:/Program Files/coLinux/vmlinux" initrd="C:/Program Files/coLinux/initrd.gz" mem=256 cobd0="C:/Program Files/coLinux/FC10/Fedora-10.img" cobd1="C:/Program Files/coLinux/FC10/swap.img" root=/dev/cobd0 eth0=slirp,,tcp:5901:5900 ro
start-Fedora-10.bat 파일의 내용을 위와 같이 수정해 줍니다.

수정된 start-Fedora-10.bat 을 실행시키면 저렇게 리눅스 커널이 부팅됩니다.

리눅스가 실행되면 저렇게 나옵니다.
친절하게도 kde나 gnome을 실행하라는군요!
그래서 gnome을 실행하려니 설치 하랍니다.
installgnome을 치면 설치가 시작됩니다

Posted by 구차니