APEX FPGA quartus 지원 버전

 

[링크 : https://fpgasoftware.intel.com/devices/]

 

Design software support for FLEX, APEX, ACEX, and HardCopy Stratix device families is not provided in versions of the Quartus II software beginning with version 9.1. Use the Quartus II software version 9.0 or earlier to support those devices.

[링크 : https://www.intel.com/.../rd07262013_295.html]

 

 

altera excalibur 시리즈는 APEX 20KE 시리즈를 내장한다고 하니.. qartus 9.0을 써야 할 듯

그런데 최신 버전은 20.1 이라는게 함정 엄청(!) 구석기 시대 꺼구만?

Part of the Altera® Excalibur™ embedded processor solutions: system-on-a-programmable-chip (SOPC) architecture (see Figure 1 on page 4) builds upon features of the APEX™ 20KE family of PLDs, with up to 1,000,000 gates (see Table 1 on page 2)

[링크 : https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/exc_arm_hwdref_mnl.pdf]