> help

?       - alias for 'help'

autoscr - DEPRECATED - use "source" command instead

base    - print or set address offset

bdinfo  - print Board Info structure

boot    - boot default, i.e., run 'bootcmd'

bootd   - boot default, i.e., run 'bootcmd'

bootm   - boot application image from memory

bootp   - boot image via network using BOOTP/TFTP protocol

cmp     - memory compare

coninfo - print console devices and information

cp      - memory copy

crc32   - checksum calculation

dhcp    - boot image via network using DHCP/TFTP protocol

echo    - echo args to console

fatinfo - print information about filesystem

fatload - load binary file from a dos filesystem

fatls   - list files in a directory (default /)

go      - start application at address 'addr'

help    - print online help

iminfo  - print header information for application image

imxtract- extract a part of a multi-image

itest   - return true/false on integer compare

loadb   - load binary file over serial line (kermit mode)

loads   - load S-Record file over serial line

loady   - load binary file over serial line (ymodem mode)

loop    - infinite loop on address range

md      - memory display

mii     - MII utility commands

mm      - memory modify (auto-incrementing address)

mmc     - MMC sub system

mmcinfo - mmcinfo <dev num>-- display MMC info

mtest   - simple RAM read/write test

mw      - memory write (fill)

mxs_mmc - MXS specific MMC sub system

nfs     - boot image via network using NFS protocol

nm      - memory modify (constant address)

ping    - send ICMP ECHO_REQUEST to network host

printenv- print environment variables

rarpboot- boot image via network using RARP/TFTP protocol

reset   - Perform RESET of the CPU

run     - run commands in an environment variable

saveenv - save environment variables to persistent storage

setenv  - set environment variables

sleep   - delay execution for some time

source  - run script from memory

tftpboot- boot image via network using TFTP protocol

version - print monitor version


> help cmp

cmp - memory compare


Usage:

cmp [.b, .w, .l] addr1 addr2 count


> help cp

cp - memory copy


Usage:

cp [.b, .w, .l] source target count


> help md

md - memory display


Usage:

md [.b, .w, .l] address [# of objects]


> help mm

mm - memory modify (auto-incrementing address)


Usage:

mm [.b, .w, .l] address


> help mtest

mtest - simple RAM read/write test


Usage:

mtest [start [end [pattern [iterations]]]]


> help mw

mw - memory write (fill)


Usage:

mw [.b, .w, .l] address value [count]


> help nm

nm - memory modify (constant address)


Usage:

nm [.b, .w, .l] address


[링크 : http://breadnborisu.blogspot.kr/2010/01/5.html]

'프로그램 사용 > u-boot' 카테고리의 다른 글

ubuntu 12.04 xinetd/tftpd 느린 이유  (0) 2016.11.08
uboot bootargs 기본값 설정하기  (0) 2015.02.09
uboot 메모리 관련 명령어  (0) 2015.01.08
u-boot 포팅 가이드  (0) 2013.08.31
u-boot 설명서  (0) 2013.06.21
uboot 포팅 - falinux 링크  (0) 2013.06.18
Posted by 구차니

댓글을 달아 주세요