| 삼바 사용자 목록 보기(how to list samba user?) (0) | 2009.11.06 |
|---|---|
| SWAT (Samba Web Admin Tool) 설치 / 구동하기 (0) | 2009.11.05 |
| 마스터 브라우저 판별하기(recognize master browser) (2) | 2009.11.02 |
| smb.conf - 삼바 재가동 시간 관련 설정하기 (0) | 2009.11.02 |
| 삼바(samba) 네트워크 공유 안되는 문제 - 권한 부족 (0) | 2009.10.30 |
| C:\>nbtstat -a localhost 로컬 영역 연결: Node IpAddress: [192.168.10.96] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- LOCALHOST <00> UNIQUE Registered LOCALHOST <03> UNIQUE Registered LOCALHOST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 |
| workgroup
or nt_domain |
<1B> | unique |
Domain Master Browser
This name identifies the Domain Master Browser (DMB). A Samba server can behave as a DMB without also being a Primary Domain Controller (PDC). The existence of a PDC promotes the Workgroup to NT Domain status, in which case we write nt_domain<1B> instead of workgroup<1B>. If there is a PDC, it must provide the DMB service for the NT Domain. Domain Controllers (both Primary and Backup) register the nt_domain<1C> Internet Group name. Registration of the nt_domain<1B> name effectively distinguishes the PDC from all of the other DCs in the domain. The NBNS will ensure that the IP address of the (unique) <1B> name is the first in the list of IP addresses |
| nt_domain | <1C> | Internet group |
Domain Controller
Every domain controller in the NT Domain will register this group name. The NBNS (WINS server) is expected to store all of the IP addresses associated with the name, though it will report at most 25 IP addresses in a NAME QUERY RESPONSE. The first entry in the list should be the IP address of the Primary Domain Controller (PDC). The rest of the IPs are ordered most recent first. This is atypical handling for group names under WINS. WINS (and, therefore, any NBNS which is WINS-compatible) will usually report only the limited broadcast address (255.255.255.255) when queried for a group name. |
| workgroup | <1D> | LAN unique |
Local Master Browser
This name identifies the Local Master Browser (LMB, sometimes called simply "Master Browser") for a subnet. WINS servers (and any NBNS which is WINS-compatible) will accept registration for <1D> unique names, but when queried will always reply with a NEGATIVE NAME QUERY RESPONSE. As a result, the LMB name is unique within its local subnet only. |
| workgroup | <1E> | group |
Browser Election Service
Every node that is capable of acting as a browser registers this group name so that it can listen for election announcements. |
| \x01\x02__MSBROWSE__\x02 | <01> | group |
Local Master Browser
This group name is registered by all Local Master Browsers (LMBs). It allows LMBs on a local LAN to find one another in order to exchange Browse Lists. This is how Browse Lists for multiple Workgroups and/or NT Domains are combined. |
| SWAT (Samba Web Admin Tool) 설치 / 구동하기 (0) | 2009.11.05 |
|---|---|
| 삼바 설정관련 문서모음 (0) | 2009.11.03 |
| smb.conf - 삼바 재가동 시간 관련 설정하기 (0) | 2009.11.02 |
| 삼바(samba) 네트워크 공유 안되는 문제 - 권한 부족 (0) | 2009.10.30 |
| CIFS로 삼바 연결시 Permission denied 에러 해결 (2) | 2009.10.20 |
The value of the parameter (a decimal integer) represents the number of minutes of inactivity before a connection is considered dead, and it is disconnected. The deadtime only takes effect if the number of open files is zero.
This is useful to stop a server's resources being exhausted by a large number of inactive connections.
Most clients have an auto-reconnect feature when a connection is broken so in most cases this parameter should be transparent to users.
Using this parameter with a timeout of a few minutes is recommended for most systems.
A deadtime of zero indicates that no auto-disconnection should be performed.
Default: deadtime = 0
Example: deadtime = 15
The value of the parameter (an integer) represents
the number of seconds between keepalive
packets. If this parameter is zero, no keepalive packets will be
sent. Keepalive packets, if sent, allow the server to tell whether
a client is still present and responding.
Keepalives should, in general, not be needed if the socket has the SO_KEEPALIVE attribute set on it by default. (see socket options). Basically you should only use this option if you strike difficulties.
Default: keepalive = 300
Example: keepalive = 600
| 삼바 설정관련 문서모음 (0) | 2009.11.03 |
|---|---|
| 마스터 브라우저 판별하기(recognize master browser) (2) | 2009.11.02 |
| 삼바(samba) 네트워크 공유 안되는 문제 - 권한 부족 (0) | 2009.10.30 |
| CIFS로 삼바 연결시 Permission denied 에러 해결 (2) | 2009.10.20 |
| samba share / server 종류 (0) | 2009.10.16 |
| 마스터 브라우저 판별하기(recognize master browser) (2) | 2009.11.02 |
|---|---|
| smb.conf - 삼바 재가동 시간 관련 설정하기 (0) | 2009.11.02 |
| CIFS로 삼바 연결시 Permission denied 에러 해결 (2) | 2009.10.20 |
| samba share / server 종류 (0) | 2009.10.16 |
| nmblookup (0) | 2009.09.28 |
| CIFS VFS: Send error in SessSetup = -13 CIFS VFS: Send error in SessSetup = -13 mount: mounting \\server\share on /mnt/samba failed: Permission denied |
| smb.conf - 삼바 재가동 시간 관련 설정하기 (0) | 2009.11.02 |
|---|---|
| 삼바(samba) 네트워크 공유 안되는 문제 - 권한 부족 (0) | 2009.10.30 |
| samba share / server 종류 (0) | 2009.10.16 |
| nmblookup (0) | 2009.09.28 |
| NetBIOS / NetBEUI / NBNS = WINS / winbind (0) | 2009.09.28 |
| # nmblookup -S "SERVERNAME" querying STREAM on 192.168.10.255 192.168.10.4 STREAM<00> Looking up status of 192.168.10.4 STREAM <00> - B <ACTIVE> WORKGROUP <00> - <GROUP> B <ACTIVE> STREAM <20> - B <ACTIVE> WORKGROUP <1e> - <GROUP> B <ACTIVE> MAC Address = 00-00-00-00-00-00 |
Table 29.1. Unique NetBIOS Names
| MACHINENAME<00> | Server Service is running on MACHINENAME |
| MACHINENAME<03> | Generic machine name (NetBIOS name) |
| MACHINENAME<20> | LanMan server service is running on MACHINENAME |
| WORKGROUP<1b> | Domain master browser |
Table 29.2. Group Names
| WORKGROUP<03> | Generic name registered by all members of WORKGROUP |
| WORKGROUP<1c> | Domain cntrollers/netlogon servers |
| WORKGROUP<1d> | Local master browsers |
| WORKGROUP<1e> | Browser election service |
| 삼바(samba) 네트워크 공유 안되는 문제 - 권한 부족 (0) | 2009.10.30 |
|---|---|
| CIFS로 삼바 연결시 Permission denied 에러 해결 (2) | 2009.10.20 |
| nmblookup (0) | 2009.09.28 |
| NetBIOS / NetBEUI / NBNS = WINS / winbind (0) | 2009.09.28 |
| smbclient : Call returned zero bytes (EOF) (0) | 2009.09.23 |
|
# nmblookup --help Usage: <NODE> ... -B, --broadcast=BROADCAST-ADDRESS Specify address to use for broadcasts -f, --flags List the NMB flags returned -U, --unicast=STRING Specify address to use for unicast -M, --master-browser Search for a master browser -R, --recursion Set recursion desired in package -S, --status Lookup node status as well -T, --translate Translate IP addresses into names -r, --root-port Use root port 137 (Win95 only replies to this) -A, --lookup-by-ip Do a node status on <name> as an IP Address Help options: -?, --help Show this help message --usage Display brief usage message Common samba options: -d, --debuglevel=DEBUGLEVEL Set debug level -s, --configfile=CONFIGFILE Use alternate configuration file -l, --log-basename=LOGFILEBASE Base name for log files -V, --version Print version Connection options: -O, --socket-options=SOCKETOPTIONS socket options to use -n, --netbiosname=NETBIOSNAME Primary netbios name -W, --workgroup=WORKGROUP Set the workgroup name -i, --scope=SCOPE Use this Netbios scope [링크 : http://linux.die.net/man/1/nmblookup] |
| CIFS로 삼바 연결시 Permission denied 에러 해결 (2) | 2009.10.20 |
|---|---|
| samba share / server 종류 (0) | 2009.10.16 |
| NetBIOS / NetBEUI / NBNS = WINS / winbind (0) | 2009.09.28 |
| smbclient : Call returned zero bytes (EOF) (0) | 2009.09.23 |
| smb.conf 예제 - samba smb.conf example (0) | 2009.09.18 |
| samba share / server 종류 (0) | 2009.10.16 |
|---|---|
| nmblookup (0) | 2009.09.28 |
| smbclient : Call returned zero bytes (EOF) (0) | 2009.09.23 |
| smb.conf 예제 - samba smb.conf example (0) | 2009.09.18 |
| samba 3.2.0 접속 테스트시 lanman auth 에러 발생 (0) | 2009.09.18 |
| nmblookup (0) | 2009.09.28 |
|---|---|
| NetBIOS / NetBEUI / NBNS = WINS / winbind (0) | 2009.09.28 |
| smb.conf 예제 - samba smb.conf example (0) | 2009.09.18 |
| samba 3.2.0 접속 테스트시 lanman auth 에러 발생 (0) | 2009.09.18 |
| 삼바의 경계선 - Samba2 / Samba3 (0) | 2009.09.18 |
| NetBIOS / NetBEUI / NBNS = WINS / winbind (0) | 2009.09.28 |
|---|---|
| smbclient : Call returned zero bytes (EOF) (0) | 2009.09.23 |
| samba 3.2.0 접속 테스트시 lanman auth 에러 발생 (0) | 2009.09.18 |
| 삼바의 경계선 - Samba2 / Samba3 (0) | 2009.09.18 |
| samba 3.0.23c가 구동못하는 조건 - Could not determine network interfaces (0) | 2009.09.18 |
|
