'saned.conf'에 해당되는 글 1건

  1. 2011.05.07 saned 서버 설정하기
프로그램 사용/saned2011. 5. 7. 14:27
초기 설정에는 전부 주석이 되어있을뿐 어떠한 내용도 들어있지 않다.
그런 이유로 sane을 사용하려면 아래의 두줄을 설정해야 한다.

# saned.conf
# Configuration for the saned daemon

## Daemon options
# Port range for the data connection. Choose a range inside [1024 - 65535].
# Avoid specifying too large a range, for performance reasons.
#
# ONLY use this if your saned server is sitting behind a firewall. If your
# firewall is a Linux machine, we strongly recommend using the
# Netfilter nf_conntrack_sane connection tracking module instead.
#
#data_portrange = 10000 - 10100
data_portrange = 6656

## Access list
# A list of host names, IP addresses or IP subnets (CIDR notation) that
# are permitted to use local SANE devices. IPv6 addresses must be enclosed
# in brackets, and should always be specified in their compressed form.
#
# The hostname matching is not case-sensitive.

#scan-client.somedomain.firm
#192.168.0.1
#192.168.0.1/29
#[2001:7a8:185e::42:12]
#[2001:7a8:185e::42:12]/64
192.168.10.10/24

# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
# /etc/services must also be properly configured to start
# the saned daemon as documented in saned(8), services(4)
# and inetd.conf(4) (or xinetd.conf(5)).

그리고 나서  sane을 구동하려면
/etc/default/saned 에서 RUN=no를 TUN=yes로 바꾸어 준다.
# Defaults for the saned initscript, from sane-utils

# Set to yes to start saned
RUN=yes

# Set to the user saned should run as
RUN_AS_USER=saned 
위의 설정은 부팅시 자동시작뿐만 아니라 수동으로 시작을 할지 안할지를 설정하는 부분이다.

 

'프로그램 사용 > saned' 카테고리의 다른 글

[조사중] epson TX213 스캐너 사용하기  (0) 2011.05.11
부팅시에 saned 구동하도록 설정하기  (0) 2011.03.17
sanetwain + windows 사용하기  (0) 2011.03.16
scx4623 sane  (0) 2011.03.15
SANE, TWAIN, REMOTESCAN  (0) 2011.03.04
Posted by 구차니