프로그램 사용/nmap2011.12.31 20:21
ifconfig를 통해서 보면 Link encapsulation이 Ethernet이 아닌 UNSPEC이기 때문에
nmap 이 실행되지 않는다. 머.. 이런 저런 이유가 있군 -_-

$ nmap 192.168.10.1

Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST
Note: Host seems down. If it is really up, but blocking our ping probes, try -PN
Nmap done: 1 IP address (0 hosts up) scanned in 3.25 seconds
minimonk@devbuntu:~$ sudo nmap 192.168.10.1
[sudo] password for minimonk: 

Starting Nmap 5.00 ( http://nmap.org ) at 2011-12-31 20:04 KST
Error compiling our pcap filter: ethernet addresses supported only on ethernet/FDDI/token ring/802.11/ATM LANE/Fibre Channel
QUITTING! 

$ ifconfig
eth1      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          inet6 addr: 0::0:0:0:0/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:5 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:84 (84.0 B)
          Interrupt:18 Base address:0x6000 Memory:bc008000-bc008fff 

eth2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.168.10.2  Bcast:192.168.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14348 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13061 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1047985 (1.0 MB)  TX bytes:1313497 (1.3 MB) 





'프로그램 사용 > nmap' 카테고리의 다른 글

nmap CVE report  (0) 2019.06.05
eth 1394에서의 nmap 실행 실패  (0) 2011.12.31
nmap 도움말  (2) 2010.10.11
nmap for windows(zenmap)  (0) 2010.10.01
Posted by 구차니
TAG

댓글을 달아 주세요