구차니의 잡동사니 모음

일단 아카이빙...

[링크 : https://help.ubuntu.com/community/MultiseatX]

집에 있는 녀석은 Lubuntu이니 LXDE인데..

xming으로 XDMCP 연결하니 그냥 빈화면이 나와서 찾아 봤더니

미.지.원 -_-

XDMCP

LXDM does not support the XDMCP protocol. An alternative that does is LightDM.

[링크 : https://wiki.archlinux.org/index.php/LXDM]

그러고 보니 이걸 설정해줬던가..

다시 해봐야지 ㅠㅠ

xdrp를 이용하면 리눅스에서

윈도우의 mstsc(윈도우 터미널 접속)을 통해 접속이 가능하다고 한다. ㄷㄷ

해볼까..

[링크 : http://abydos.tistory.com/3]

[링크 : http://dustjrdk.iptime.org/?p=34]

[링크 : http://www.whatwant.com/481]

network-manager가 기본이긴 하나..

wpa2가 안된다고하니 wicd를 써보라는 지인의 조언...

[링크 : https://help.ubuntu.com/community/WICD]

[링크 : http://wicd.sourceforge.net/]

-> [링크 : https://launchpad.net/wicd]

+

UI만 바뀌지 그게 그거인 기분..

어짜피 안 잡힐놈은 안 잡히는건 동일한건가..

될려나.. 나중에 해봐야지

LANG="ko_KR.eucKR"

SUPPORTED="en_US.UTF-8:en_US:en:ko_KR.eucKR:ko_KR:ko"

SYSFONT="lat0-sun16"

SYSFONTACM="8859-15"

[링크 : http://compeople.tistory.com/68]

/etc/sysconfig/i18n

LANG="en_US.UTF-8" 

SUPPORTED="en_US.UTF-8:en_US:en" 

SYSFONT="latarcyrheb-sun16"

[링크 : https://www.centos.org/docs/5/html/5.1/Deployment_Guide/s2-sysconfig-i18n.html]

LANG="ko_KR.UTF-8"

SYSFONT="latarcyrheb-sun16"

[링크 : http://iwithjoy.tistory.com/entry/CentOS-ssh-접속-한글깨짐-수정]

+

$ ls -al /usr/share/consolefonts

$ vi /etc/default/console-setup

# Valid font faces are: VGA (sizes 8, 14 and 16), Terminus (sizes

# 12x6, 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBold (sizes

# 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBoldVGA (sizes 14

# and 16) and Fixed (sizes 13, 14, 15, 16 and 18).  Only when

# CODESET=Ethiopian: Goha (sizes 12, 14 and 16) and

# GohaClassic (sizes 12, 14 and 16).

# Set FONTFACE and FONTSIZE to empty strings if you want setupcon to

# set up the keyboard but to leave the console font unchanged.

FONTFACE="Fixed"

FONTSIZE="16"

# You can also directly specify nonstandard font or console map to load.

# Use space as separator if you want to load more than one font.

# You can use FONT_MAP in order to specify the Unicode map of the font

# in case the font doesn't have it embedded.

# FONT='lat9w-08.psf.gz brl-8x8.psf'

# FONT_MAP=/usr/share/consoletrans/lat9u.uni

# CONSOLE_MAP=/usr/local/share/consoletrans/my_special_encoding.acm

# You can also specify a screen size that setupcon will enforce.  This can not

# exceed what the current screen resolution can display according to the size of

# the loaded font.

#

# SCREEN_WIDTH=80

# SCREEN_HEIGHT=25

[링크 : http://unix.stackexchange.com/questions/30855/how-to-list-console-and-kernel-fonts]

lubuntu 에서 openbox를 채용하고 있는지 모르겠지만

윈도매니저에서의 단축키 찾는중..

Openbox default key combinations

Alt-F4 Close the active window

Alt-Space Show the client menu for the active window

Alt-Tab Cycle between windows on the desktop

Alt-Shift-Tab Cycle between windows on the desktop in reverse order

Control-Alt-Tab Cycle between panel and desktop windows on the desktop

Windows-D Hide all windows to show the desktop

Windows-E Run the Konqueror file manager (This is an example of how to run a program with a key binding)

Alt-Escape Lower the active window behind other windows, and activate the last window that was in use

Windows-F1 Go to the first desktop instantly

Windows-F2 Go to the second desktop instantly

Windows-F3 Go to the third desktop instantly

Windows-F4 Go to the fourth desktop instantly

Control-Alt-Left Open the desktop switching dialog, to go to the desktop to the left of the current one

Control-Alt-RightOpen the desktop switching dialog, to go to the desktop to the right of the current one

Control-Alt-Up Open the desktop switching dialog, to go to the desktop above the current one (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Control-Alt-Down Open the desktop switching dialog, to go to the desktop below the current one (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Shift-Alt-Left Open the desktop switching dialog, to go to the desktop to the left of the current one, and bring the active window with you

Shift-Alt-Right Open the desktop switching dialog, to go to the desktop to the right of the current one, and bring the active window with you

Shift-Alt-Up Open the desktop switching dialog, to go to the desktop above the current one, and bring the active window with you (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Shift-Alt-Down Open the desktop switching dialog, to go to the desktop below the current one, and bring the active window with you (This will only be useful if you use a pager to set up a desktop layout with multiple rows)

Alt-Left mouse button Move a window

Alt-Right mouse button Resize a window. The window is resized towards the edge that the mouse is nearest to. So use Alt-Right mouse button in the top right corner of a window to resize that corner.

Alt-Scroll wheel Change desktops forward and backward

[링크 : https://wiki.debian.org/Openbox#Keyboard_shortcuts]

xterm은 설정이 되고

리부팅 이후에는 lxterm도 적용은 되나.. 클릭이나 드래그로는 안되서

우클릭을 해야 이전 페이지로 갈수 있다는건... 설정을 잘못한걸려나?

[링크 : http://www.aboutlinux.info/2005/10/configuring-xterm-in-linux.html]

[링크 : https://wiki.archlinux.org/index.php/Xterm]

흐음.. 이게 그나마 가장 자세한데.. 영안되네 ㅠㅠ

[링크 : http://beforewisdom.com/blog/tech/xterm-with-a-scrollbar/]

---

걍 lxterminal을 쓰자 ㅋㅋㅋ

ctrl-shift-t로 단축키

[링크 : http://askubuntu.com/questions/95435/term-xterm-or-uxterm]

gnome으로 찾으니 안나오지 ㅠㅠ

네트워크 아이피 설정하려고 쑈하는데

어떤 프로그램인지 몰라서 한참 헤메다가 이제야 생각났네..

$ nm-connection-editor

음.. 우분투 x86 머신을

synology 처럼 네트워크 접속시 자동으로 깨어나도록 하고 싶어서

찾아 봤더니 키워드를 잘못 찾아서 헤메고 있었던 기분...

아무튼.. 범용제품으로는 ARM cpu를 채용한 녀석만큼

딱 입맛에 맞춰서 재웠다 깨웠다는 조금 힘들려나..

매번 WOL로 살리는것도 귀찮은데..

[링크 : http://blog.dustinkirkland.com/2009/02/ubuntu-server-suspendhibernateresume.html]

[링크 : http://askubuntu.com/questions/1792/how-can-i-suspend-hibernate-from-command-line]

[링크 : https://wiki.ubuntu.com/UnderstandingSuspend]

opencv 3.0.0을 빌드해서 올렸다.. 다시 돌릴려는데 영 안되네..

$ pkg-config opencv --libs

-L/usr/local/lib -lopencv_calib3d -lopencv_core -lopencv_features2d -lopencv_flann -lopencv_hal -lopencv_highgui -lopencv_imgcodecs -lopencv_imgproc -lopencv_ml -lopencv_objdetect -lopencv_photo -lopencv_shape -lopencv_stitching -lopencv_superres -lopencv_video -lopencv_videoio -lopencv_videostab

$ sudo find / -name "*.pc" | grep opencv

/home/pi/src/openCV/opencv-3.0.0/build/unix-install/opencv.pc

/usr/lib/pkgconfig/opencv.pc

/usr/local/lib/pkgconfig/opencv.pc

$ sudo mv /usr/local/lib/pkgconfig/opencv.pc /usr/local/lib/pkgconfig/opencv.pc.bak

$ sudo ldconfig

$ pkg-config opencv --libs

-lopencv_calib3d -lopencv_contrib -lopencv_core -lopencv_features2d -lopencv_flann -lopencv_highgui -lopencv_imgproc -lopencv_legacy -lopencv_ml -lopencv_objdetect -lopencv_photo -lopencv_stitching -lopencv_ts -lopencv_video -lopencv_videostab

정보는 바뀌는데 정작 빌드 하면 이상하게 된다.. ㅠㅠ