아두이노 부품들...

헐.. 다 합치면 한 30만 넘을듯 ㄷㄷㄷㄷ

RFID

[링크 : http://www.seeedstudio.com/depot/Grove-125KHz-RFID-Reader-p-1008.html] 5V / TTL 9600bps

    [링크 : http://www.seeedstudio.com/wiki/Grove_-_125KHz_RFID_Reader]

Ultrasonic Ranger

[링크 : http://www.seeedstudio.com/depot/Grove-Ultrasonic-Ranger-p-960.html] 5V (3.3에도 작동은 함)

    [링크 : http://www.seeedstudio.com/wiki/Ultra_Sonic_range_measurement_module]

Joystick

[링크 : http://www.seeedstudio.com/depot/Grove-Thumb-Joystick-p-935.html] 5V

Chainable LED

1. The ic will latch a bit of data when the rising edge of the clock coming, And the data should changed after the falling edge of the clock; 2. The flag bits is two “1”; 3. The verify dta B7’is equal to ~B7,and B6’1S ~B6,B7 and B6 are the gray data of blue 4. the serial data is MSB first ,and the sortorder is blue ,green, red

[링크 : http://www.seeedstudio.com/wiki/images/b/be/P9813_datasheet.pdf]

    [링크 : http://www.seeedstudio.com/depot/Grove-Chainable-RGB-LED-p-850.html] 5V 20mA

Relay

[링크 : http://www.seeedstudio.com/depot/Grove-Relay-p-769.html]

Humidity - Temperature Sensor

[링크 : http://www.seeedstudio.com/depot/Grove-TempHumi-Sensor-p-745.html] 3.3~5V

Serial Camera

[링크 : http://www.linksprite.com/upload/file/1291522825.pdf]

[링크 : http://store.cutedigi.com/infrared-jpeg-color-camera-serial-uart-rs232-level/] 5V / TTL 38400bps

    [링크 : http://learn.linksprite.com/.../use-linksprite-jpeg-camera-to-take-picture-and-store-to-a-sd-card/]

PIR Sensor

[링크 : https://cdn.openimpulse.com/.../DYP-ME003_PIR_Sensor_Module_Datasheet.pdf] 5V / output 3.3 high/low

    [링크 : http://www.vetco.net/catalog/product_info.php?products_id=12843]

    [링크 : https://learn.adafruit.com/downloads/pdf/pir-passive-infrared-proximity-motion-sensor.pdf]

bluetooth shield

[링크 : http://www.seeedstudio.com/wiki/Bluetooth_Shield] 3.3V / TTL 38400bps

Mega Shield

[링크 : http://www.seeedstudio.com/depot/Grove-Mega-Shield-p-934.html]

    [링크 : http://www.seeedstudio.com/wiki/Grove_-_Mega_Shield]

Wifi shield

[링크 : https://www.arduino.cc/en/Main/ArduinoWiFiShield]

android board

[링크 : http://www.seeedstudio.com/depot/Seeeduino-ADK-Main-Board-p-846.html]

    [링크 : http://www.seeedstudio.com/wiki/Seeeduino_ADK_Main_Board]

GND / Vcc / Data / Data 식으로 주로 사용하는 듯?

[링크 : http://www.seeedstudio.com/depot/grove-base-shield-p-754.html?cPath=132_134]